Rail Kits

CR30 Rail Kit R1.1
Y-Axis Install When installing the Y Axis rail kit on the, install one side at a time Do not allow the bearing blocks to slide off the rails. You ca...
Sun, 1 May, 2022 at 8:51 AM
Micro Swiss Direct Drive - CR-10S Pro Installation
This article is for internal use currently so only basic information is included. You will need a few components to do this correctly.  Parts needed C...
Mon, 21 Feb, 2022 at 2:14 PM
CR-30 Y Axis LRK Revision
After extensive testing, we noticed more deflection in the print head then acceptable, so we tested a couple revisions. Our current revision is the easiest ...
Thu, 7 Apr, 2022 at 3:59 PM
CR Linear Rail X Axis Hotend Setup Notes
To make sure your X Axis upgrade goes smoothly, see below for added fastener lengths needed, compared to stock hot end configurations. If you’re running an ...
Wed, 3 Aug, 2022 at 2:31 PM
Universal Creality X Axis Linear rail kits
TABLE OF CONTENTS CR-10, CR-10S, Ender 3/ 3 Pro CR-10S PR0 V1/V2 & CR-10 Max CR-10 V2, CR-10 V3 Other Combinations Reference Data Printer Ra...
Wed, 10 Aug, 2022 at 4:54 PM
Universal Creality Y Axis Linear rail kits
Printer Rail length (mm) Ender 3 320 300 Size  455 CR10S 400 570 CR10 Max 610 CR10 S500 670 SHCS FHCS BHCS Sto...
Wed, 10 Aug, 2022 at 4:55 PM
Creality CR-10S PRO/CRX Y Axis Linear rail kits
Picture Shortened Form Screw Type BHCS Button Head SHCS Socket Head FHCS Flat Head (Counter Sink screw)
Wed, 10 Aug, 2022 at 4:55 PM