Updating Firmware (Mainboard) on the CR-6 SE
The firmware provided here is for 4.5.3 and ERA v1.1.0.3 motherboards only!  This process will require 1 SD card (<=16gb) OR adapter. The main board ...
Wed, 16 Feb, 2022 at 1:11 PM
CR6 SE Homing, Printing in Mid Air?
Quick Links Printable Cable Support for CR-6 SE from TM3D Typically, this is from poor cable management and the printhead cable and/or PTFE is pulling o...
Mon, 28 Mar, 2022 at 12:20 PM