Creality 3D Printers
The process below should not be necessary on new machines from Tiny Machines 3D. If you purchased from another vendor OR you notice that your bed is not fla...
Mon, 27 Sep, 2021 at 3:01 PM
Main reasons that cause nozzle cloggs to occur: Inconsistent filament diameter Incorrect extrusion/retraction settings Heat-creep What is a nozzle ...
Wed, 21 Jul, 2021 at 5:16 PM
This information is using for troubleshooting by experienced users. Note! Connections circled red are all used on CR-10S Pro V2 with BL Tou...
Mon, 28 Feb, 2022 at 1:20 PM
First set the printer on its side, with the X Belt tensioner (opposite of X motor) touching the table. Remove the screws circled in red and blue. Lon...
Tue, 26 Jul, 2022 at 4:13 PM