Nozzle Clogs and how to clear them
Main reasons that cause nozzle cloggs to occur: Inconsistent filament diameter Incorrect extrusion/retraction settings Heat-creep What is a nozzle ...
Wed, 21 Jul, 2021 at 5:16 PM
Check and Adjust the Vref on Creality CR-10 Smart / Smart Pro
First set the printer on its side, with the X Belt tensioner (opposite of X motor) touching the table. Remove the screws circled in red and blue. Lon...
Tue, 26 Jul, 2022 at 4:13 PM